Audion Passive Pre-Amplifier

Audion Select 1.0 5 channel line level passive pre-preamplifier. 

Newly Launched
5/5

Audion Select 1.0 Passive pre-amplifier

The Audion Select 1.0 passive  line level pre-amplifier is a passive pre-amplifying device. Hard wired and built with 5 line level inputs switched from the front panel, 2 line outputs and a direct un-switched unattenuated tape output.

It is hard wired with an Alps pot fitted and with a ground loop lift switch designed to stop any ground loops.. Being a passive pre-amplifier it will not add hum or tube noise to your current equipment
The black aluminium chassis is designed to match cosmetically to the rest of the Audion Anniversary range of power and pre-amps in both looks and sound quality, and having the same size and shape will fit in with other Audion equipment. It has been designed for users with stereo or mono-block amplifiers to add more inputs and volume control to their setup.
We are able to offer a 48way stepped attenuator, and / or silver internal wiring, and with the option of WBT Nextgen RCA sockets.

Being a passive stage it will not colour or alter your soundstage in any way, but at the same time it will not diminish it either. In use it is absolutely invisible, with convincing depth even at very low levels. It brings recordings to life and places you directly in front of the performance.

 

Audion Select SA1 front

Audion Select 1.0 passive pre-amplifier

The Audion 1.0 Passive Pre-amplifier is designed and built using the best components that contribute to giving it pure sound reproduction. The volume control is a HIGH QUALITY ALPS stereo pot of the type to make sure you get precise stereo sound on any volume level.

The 1.0 passive pre-amp has 5 stereo line level inputs, 2 stereo outputs and an unattenuated stereo line tape output, as well as a ground lift switch to enable the internal ground to be floated above chassis ground level. This helps to reduce hum from connected equipment.

More and more audiophiles are discovering the benefits of passive pre-amps, mainly because more often than not, a passive pre-amp does the essential job of  a pre-amp (input switching and controlling volume) while doing the least amount of harm to the audio signal.

A passive pre-amp is much like a simple volume control, Few parts to alter the sound, and best of all what comes out is pretty much what goes in.

The chassis is of the same all aluminium construction as our Anniversary amplifiers, having similar front dimensions and looks but is easy to place as it is only half the depth.

Technical specifications for the Select 1.0 Passive pre-amplifier and channel switch box. 

Type: Passive pre-amplifier volume control and channel selector
Inputs: 5 stereo pair line level inputs 
Outputs: 2 stereo pair attenuated 50K line level and 1 Pair stereo unattenuated (tape output)
Control Adjustment: Alps pot 
Internal Wiring: Pure Solid 4N Copper
Dimensions: 21cm deep, 23cm wide and 10cm tall.
Case: designed to match other amps in the Anniversary range.

Product options for the Select 1.0 Passive pre-amplifier

There are currently several upgrade options available for the 1.0

Silver wired internal interconnects / ground wires
Gold single RCA sockets
Volume only remote control

WBT Nextgen RCA terminals

Upgrade options and upgraded product categories direct from the factory.

Product options for the Select 1.0

There are currently several upgrade options available for the 1.0

Silver wired internal interconnects / ground wires
Gold single RCA sockets

WBT Nextgen RCA terminals
Remote control volume

Product reviews from around the World. 

There are currently no reviews for the 1.0 passive pre-amplifier as it is a newly launched product

The Audion 1.0 Passive Pre-amplifier is designed and built using the best components that contribute to giving it pure sound reproduction. The volume control is a HIGH QUALITY ALPS stereo pot of the type to make sure you get precise stereo sound on any volume level.

The 1.0 passive pre-amp has 5 stereo line level inputs, 2 stereo outputs and an unattenuated stereo line tape output, as well as a ground lift switch to enable the internal ground to be floated above chassis ground level. This helps to reduce hum from connected equipment.

The chassis is of the same all aluminium construction as our Anniversary amplifiers, having similar front dimensions and looks but is easy to place as it is only half the depth.

Technical specifications for the Select 1.0 Passive pre-amplifier and channel switch box. 

Type: Passive pre-amplifier volume control and channel selector
Inputs: 5 stereo pair line level inputs 
Outputs: 2 stereo pair attenuated 50K line level and 1 Pair stereo unattenuated (tape output)
Control Adjustment: Alps pot 
Internal Wiring: Pure Solid 4N Copper
Dimensions: 21cm deep, 23cm wide and 10cm tall.
Case: designed to match other amps in the Anniversary range.

Product options for the Select 1.0 Passive pre-amplifier

There are currently several upgrade options available for the 1.0

Silver wired internal interconnects / ground wires
Gold single RCA sockets
Volume only remote control

WBT Nextgen RCA terminals

Upgrade options and upgraded product categories direct from the factory.

Product options for the Select 1.0

There are currently several upgrade options available for the 1.0

Silver wired internal interconnects / ground wires
Gold single RCA sockets

WBT Nextgen RCA terminals
Remote control volume

Like our page – click any of the links below.. 
Share on facebook
Facebook
Share on google
Google+
Share on twitter
Twitter
Share on linkedin
LinkedIn